• Lifts load to a maximum height of 21' 2.5" (7.94 m)
• Capacity of 800 lbs (363 kg) for lifting heavy loads
• Lift weighs 405 lbs (184 kg) for applications with weight limitations

The Genie SLA-20 Superlift is a material lift with a standard base, steel forks, a 21' 2.5" (7.94 m) maximum lifting height, and an 800 lbs (363 kg) capacity. The SLA-20 operates using a one-speed manual winch for lifting and lowering the forks and has a patented telescoping mast system.

Easy to Maneuver

The lift has 4" (10 cm) maneuverable front casters, and 5" (13 cm) rear casters that have 4-way swivel locks and side brakes for securing the lift during use.

Compact Design

The steel forks measure 27" (l) by 23" (w) by 2.5" by 2.5" (d), and the entire lift can fit through standard doorways for ease of access. A hold-down bar secures the mast during transport.

About Material Lifts

Material lifts are used for lifting a variety of loads such as installation of electrical fixtures, ducts, drywall, ceiling panels, and overhead sprinklers, among many others. For industrial use only.

About Genie Industries

Genie Industries, a subsidiary of Terex Corporation, was founded in 1966 with the introduction of the Genie Hoist, a portable pneumatic material lift. Genie is headquartered in Redmond, WA, and manufactures a variety of lifts, booms, light towers, and telehandlers.

Easy to maneuver, load, and store. View larger.

View detailed PDF.