Gear rack made of brass Ms58 module 0.3 tooth width 2mm height 4mm length 250mm
Material: Brass Ms58 (2.0401). Milled teeth. Straight teeth.
Pressure angle 20°. The teeth on the gear racks are manufactured using
an overhead milling cutter. This leads to negative tolerances for
dimensions a and h0: -0,2 mm. * Length = Nominal length. The real length
is roughly one multiple of the pitch.
Module | 0,3 |
b [mm] | 2 |
ha [mm] | 4 |
Nominal Length L* [mm] | 250 |
h0 [mm] | 3,7 |
Material | Ms58 |
Weight [g] | 14 |