GW Instek GPR-1810HD Single Output Linear DC Power Supply with LED Display, Low Power Demands, 10 Output Amps, 18 Output Volts, 180 Output Watts

The GPR-M Series is single output, 180W, linear DC power supply, featuring all the same functions as the GPR-H Series but for lower power demands. Like the GPR-H Series, the GPR-M Series are suitable for high-end precision bench top applications. Low load and line regulation for both constant voltage and constant current mode ensure reliable, predictable output. Overload and reverse polarity protection as well as internal selection for dynamic or constant load are standard. Constant Voltage Operation: Regulation: Line regulation less than or equal to 0.01 percent + 3mV, Load regulation less than or equal to 0.01 percent + 5mV (less than 10A), Load regulation less than or equal to 0.02 percent + 5mV (greater than or equal to 10A). Ripple and Noise: less than or equal to 1mVrms (5Hz to 1 MHz). Recovery Time: less than 100 microseconds (50 percent load change, minimum load 0.5A). Output range: 0 to rating voltage continuously adjustable. Constant Current Operation: Regulation: Line regulation less than or equal to 0.2 percent + 3mA, Load regulation less than or equal to 0.2 percent + 3mA. Ripple Current: less than or equal to 3mArms. Output Range: 0 to rating current continuously adjustable. Meter: 3-1/2 digital 0.5" LED display; Accuracy +/-(0.5 percent of reading + 2 digits). Insulation: Chassis and Terminal: 20 megohm or above (DC 500V). Chassis and AC Cord: 30 megohm or above (DC 500V). Power Source, 100 MHz Bandwidth: AC 100V/120V/220V/240V +/-10 percent, 50/60Hz. Accessories: user manual x 1, power cord x 1, test lead GTL-104 x 1. Measures 255mm width by 145mm height by 335mm depth.