Full Closed Loop Stepper Servo Motor With Integrated Stepper Servo Drive IHSS57-20

Feature:
Full Closed Loop
1.Accurate position and speed control can achieve the most strict request of the application.
2.High robustness servo control adapt to wide range change of inertial load and friction load.
3.The Motor Wtih 1000 Cpr encoder,support vector closed loop control.Compare with traditional step motor,it solved the problem of lose step.
Smooth and accurate
1.Based on the feedback encoders space vector current control algorithm and vector smothing filtering technique.
2.It can resist the "low-frequency resonance"caused by the traditional step motor.
3.The motor can still run smoothly under low speed.
4.This is a perfect solution to slove the problem of noise and vibration for the traditional stepper motor.
High speed response
1.Hybrid step servo system have some adcantages of the traditional open-loop stepper system,position response input and output command signal are real-time syschronzation quickly start/stop and zero-speed stop stably.
2.In condition of point-to-point fast positioning,advanced servo control technology provides a large torque output.It makes the system has a very high dynamic response,it is far over the limit of step system.
High torque/High speed
1.Hybrid servo drive system adopts the optimized current control mode,the torque of the motor can be 100% full use.There is no need to consider torque redundance when design the machine.
2.A large torque output can simplified the complexity of the deceleration equipment in certain cases.
3.The high-speed performance of the hybrid step servo drive system improve 30% and the torqued improve 70% compare with opened loop step motor.This makes the motor can maintain high-torque operation under high-speed.
Specification:
Rated Voltage:36V DC
Torque:2N.M