Friction Clutch PD Torque Adjustable up to 33 Nm Outer Diameter 67mm Pilot bore 12mm max. bore 25mm PN: 61100200
Material: Steel.
Multi-plate friction clutches have proven to deliver an optimal performance
when used with slow-starting machines. They are also used as safety couplings.
The occuring torque peaks are levelled out by friction clutches.
The disk pairing is steel/sintered bronze, with the inner plates of the pairings lined. The composition of the lining means up to 400°C can be withstood short term.
At permanent load, however, only up to 250°C. Sintered clutch plates have the advantage of an almost constant friction coefficient even with fast growing circumferential speeds and higher temperatures. The assembly can be used
for dry and wet operation. Advantages of these couplings are: Practical
dimensions. Easy adjustment and re-adjustment. Inner and outer plates with
special splines.
Couplings are available pre-drilled H7 ex stock.
Customized bores and feather-key grooves available at surcharge.
| Torque min. [Nm] | 33 |
| Torque max. [Nm] | 14 |
| Pilot Bore A H7 [mm] | 12 |
| Bore A max. [mm] | 252) |
| B [mm] | 3x für M 5 |
| D [mm] | 67 |
| GH7 [mm] | 32 |
| G [mm] | 32 |
| H [mm] | 44 |
| L [mm] | 35 |
| L1 [mm] | 43 |
| O [mm] | 28 |
| Speed max. [rpm] | 3000 |
| Weight [kg] | 0,81 |
| Spare Disk Set Art.-No. | 611 012 00 |
Latest Price Updates
