Foxnovo CP2102 USB UART Board (type A) Single-Chip USB to UART Data Transfer Convertor Module Development Board (Green)

Features
- Single-Chip USB to UART Data Transfer:
1. No external resistors required, no external crystal required
2. On-chip power-on reset circuit and voltage regulator
3. Integrated 1024-Byte EEPROM
- USB Function Controller:
1. USB Specification 2.0 compliant; full-speed (12 Mbps)
2. USB suspend states supported via SUSPEND pins
- USBXpress Direct Driver Support: Windows 7VistaServer 2003XP2000, Windows CE
- Voltage output support: 5V or 3.3V
- Integrated USB protection device: SP0503
- 3 LEDs: TXD LED, RXD LED, POWER LED
- Pins accessible on pinheaders: TXD, RXD, RTS, CTS
- Other pins are accessible on drilled holes, easily connected to user application system (separate pinheaders are provided).
Example Applications
1. Upgrade of RS-232 legacy devices to USB
2. USB to RS-232 serial adapter
How to Use
In the Case of Working with a MCU:
- VCCIO: 3.3V or 5V output (the module is powered from USB, onboard jumper should be shorted to 3.3V or 5V)
- GND: connects to GND
- TXD: connects to MCU.RX (signal direction: MCU.RX lt; lt; CP2102 lt; lt; PC.TX)
- RXD: connects to MCU.TX (signal direction: MCU.TX gt; gt; CP2102 gt; gt; PC.RX)
- RTS: connects to MCU.CTS (signal direction: MCU.CTS lt; lt; CP2102 lt; lt; PC.RTS)
- CTS: connects to MCU.RTS (signal direction: MCU.RTS gt; gt; CP2102 gt; gt; PC.CTS)
Note: VCP examples and USBXpress driver program library are provided.
--------------------------------------------------------
Package Including
1 * CP2102 USB UART Board (type A) (Green)
1 * 40-pin Male Pinheader 40-pin Female Pinheader