Ford 6.0L Basic EGR Delete Kit Custom Diesel FDD2. Fits Ford 2003, 2004, 2005, 2006, 2007 Fords, including F-250, F-350, F-450, Econoline, and Excusion Trucks with Powerstroke Diesel Engines.

This EGR Delete kit is for the Ford 2003 through 2007 6.0 liter Powerstroke diesel engine and fits the F-250, F-350, F-450, F-550 as well as the Econoline and Excursion models. This kit is intended for off road use. Please check your state laws before installing kit. The EGR system operates by taking some of the exhaust gases and sends it back into the motor. The hot exhaust gases are cooled by your engine cooling system. The problem is that the coolant is heated up by trying to cool the hot exhaust. This makes your engine operate at a higher temperature. By eliminating the EGR and Cooler you are sending all your exhaust gases thru the turbo and your coolant is now able to do the job it was intended for, cooling the engine. Removing the EGR valve eliminates the chance of any blockages in the system. Removing the EGR valve may set off a check engine light. You will need to run a tuner to turn off the EGR system to eliminate the code/light. Does not include an Up-Pipe. If you need an Up-pipe, see our Up-Pipe listing: http://www.amazon.com/gp/product/B00BGB5ZOS. Or, buy the Complete Kit: http://www.amazon.com/gp/product/B005CHVWYY.  Manifold and J-Tube constructed from 6060 aluminum  J-Tube is pulse welded into aluminum manifold for a leak free connection  Pressure tested and guaranteed not to leak  Coolant is re-routed back to the motor, not just blocked off  Stops soot buildup  Completely deletes your egr cooler  No other parts are need for this installation.  Your intake manifold does not have to be removed to install this kit, saving you hours.  This kit is intended for off road use, Please check your state laws before installing kit.  Does not include intake gaskets  Does Not Require The Removal Of The Intake Manifold Or Cab