Fluke Norma 5000 6 Phase High Precision Power Analyzer with PP64 Channel, IEEE488 and Ethernet interface, PI1 Process Interface and On-board Printer, 0.03% Accuracy, 0.3V to 1000V, 10 A Current Range
The Fluke Norma 5000 6-Phase High Precision Power Analyzer is designed for engineers to test and develop power electronics such as electric motors, inverter drive systems, lighting systems, power supplies, automotive components, and transformers. This configuration has six power phase channels, available in a choice of range, sampling rate, and other specifications. The analyzer measures single-phase or three-phase current and voltage, analyzes harmonics and Fast Fourier Transformation (FFT), and calculates power and other derived values. The analyzer has 341 kHz or 1 MHz sample rates for detailed signal analysis, and the average time is user-selectable (from 15 milliseconds to 3,600 seconds). It accurately displays dynamic events on all phases at the same point in time with simultaneous parallel acquisition of all phases. For detailed specifications, including measured values and channel details, refer to the Fluke Norma 4000/5000 datasheet.
The optional process interface provides the simultaneous recording of torque, speed, and mechanical power. It includes four analog outputs and synchronous capture at a sample rate of 34 kHz. The process interface is included in FLUKE-N5K 6PP50IP, 6PP50IPR, 6PP54IPR, 6PP54IP, 6PP64IPR, and 6PP64IP.
The analyzer has a 5.7" color display, with user-selectable background lighting and contrast, and can download data by RS232 or USB connection (cable sold separately). IEEE488/Ethernet connection (IFC2) is also available in FLUKE-N5K 6PP42IBR, 6PP50IR, 6PP50I, 6PP50IP, 6PP50IPR, 6PP54IR, 6PP54I, 6PP54IPR, 6PP54IP, 6PP64I, 6PP64IR, 6PP64IPR, and 6PP64IP. The following models include an internal printer: FLUKE-N5K 6PP42IBR, 6PP50IR, 6PP50IPR, 6PP54IR, 6PP54IPR, 6PP64IR, and 6PP64IPR. PC software (included) facilitates setup, data download, analysis, and report writing. The analyzer has 4 MB memory for storage of measured values. Inputs are galvanically isolated to avoid short circuits in all applications. The analyzer complies with European Union (EN) 61010-1 2nd Edition 1000 V Category II (600V Category III), Pollution Degree 2, Safety Class I. Industrial power meters are commonly used to test and evaluate power systems.
| Number of power phase channels | Six |
| Bandwidth | DC to 3 MHz or to 10 MHz depending on input module |
| Basic accuracy | 0.2%, 0.1%, or 0.03% depending on input modules |
| Voltage input range | 0.3V to 1000V |
| Current input range (direct, not via shunt) | 0.03 mA to 20 amp depending on input module |
| Frequency range | DC and 0.2 Hz to sample rate |
| Fast Fourier Transformation (FFT) | Measured values: U, I, P per phase. Order: 1st to 40th harmonics, maximum half sample frequency. |
| Working temperature range | 5 to 35 degrees C (41 to 95 degrees F) |
| Weight | 7 kg (15 lbs.) |
| Dimensions* | 150 x 447 x 315 mm / 5.9 x 17.6 x 12.4 inches |
*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Industrial power meters measure electrical properties such as voltage, current, power, and energy to monitor the efficiency and performance of a power system. They are used for designing, installing, and maintaining industrial, commercial, and residential power supply systems. More advanced models have features for comparing and recording multiple measurements taken at different times and in different areas.
Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.
Latest Price Updates
