Fluke DP120 Differential Voltage Probe, +/- 2.5 percent Accuracy, DC to 20 MHz BandWidth, 17.5ns Rise Time, 60" Length

Designed to make measurements on signals with floating reference, the DP120 Differential Probe has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 megaohms in parallel with 6 pF. Input impedance between the inputs is 10 megaohms with a capacitance of 5 pF. Shrouded banana probe tip Input. 1.5 meter probe length. Maximum input voltage to ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031. Maximum differential voltage: 1000V DC or1000Vrms or 1200V (DC + AC peak). Safety designed 0.5m BNC output cable. 200x and 20x attenuation. DC to 20 MHz (-3 dB) bandwidth. +/-2.5 percent accuracy. 17.5 ns rise time. CMRR: 200x: at 60 Hz = 80dB, at 1 MHz = 50 dB 20x: at 60 Hz = 70dB, at 1 MHz = 40 dB. Battery type: Alkaline 9 volt, NEDA, IEC6LR61. 8-hour operation, 400-hour stand by battery life. PM 8907/80n (optional) power adapter. AC85A large jaw alligator clips and AC83 pin-grabber test clips included accessories.