Float Switch for Sump Pump - 10-Foot Water Level Sensor with Honeywell Microswitch and Adjustable Tether Length for Ground Water Bilge Pump and Water Tank – Non-Corrosive PP Casing, Rated to 13 Amps
This dual purpose float switch can be used for both emptying and filling operations.
- Directly Controls pumps up to 1/2 HP at 120 Volts or 220 Volts
- Up to 12 Amperes continuous or 13.3 Non continuous AC Amperage
- 12 VDC motor loads up to 13.3 Amps. Contact us for other DC Applications
- Environmental friendly (Mercury Free)
- suitable for use in septic, sump, and potable water applications
- Cable Weight is not to be used in Potable Water
- Built with a Honeywell Micro switch, rated for 100,000 operations
- Cable is Coated with PVC / Thermoplastic jacket
- Internally Contains a Stainless Steel Ball
- Includes adjustable counterweight.
- Manufactured in Argentina
- 5 Year Warranty
- Constructed with non-toxic polypropylene
- Float dimensions are 4.1 in x 3 in x 1.6 in (105 x 78 x 41 mm)
- Rated for indoor or outdoor use: operating temperatures 32 to 140F (0 to 60C)
- CE Marked, IP68 Rated, tested to IEC 60730-1 (08-2003) + IEC 60730-2-16 (08-2001)
- Reinforced Double O Ring Cable Entry
Review online instructions at bit.ly/FloatSwitch