Fibre Glast PVA Release Film - 1 Quart - Sprays On – Easy Release for Molds

FEATURES:

• PVA Release Film is a water and alcohol-based polyvinyl alcohol (PVA) coating comprised of water-soluble, film forming materials
• Allows easy release of parts from a mold
• Parts easily from mold surface and is readily dissolved from molded parts and spray
  equipment with water
• Forms a smooth, glossy surface that will not shrink or pull away from corners or curved surfaces
• Particularly recommended as a parting agent for separation between polyester or epoxy resins and various mold surfaces, but may be used with most thermoset resins
  
  

TIPS:

• PVA can be brushed on, but for best results, apply with a spray gun, 12–18 inches away from substrate
• Generally, apply in three layers: the first, a thin mist, allowing 10-15 minutes to dry completely - then apply two heavier flow coats, allowing each to dry completely (30-45 minutes each)
• May be applied over polyester repairs, or gel coat, as a surface layer for airless tack-free cure