Fastway Flip 88-00-6525 Trailer Tongue Automatic Fold-Up Jack Foot Plate 2" Jacks-6" Extension

Save yourself 50 cranks both up and down with the FLIP. It is completely automatic, extends your trailer jack, and has two times more contact surface area than other jack feet, providing more stability for your trailer, with no springs, cables, pins, or clips required. It is the only jack foot that is completely automatic and eliminates the need to search for rocks or wood blocks to put under your trailer jack.

It's time to stop fumbling with a stack of wood blocks to stick under your tongue jack. Get a Fastway Flip jack foot today and say goodbye to your tongue jack hassles.

With the trailer hitched as you usually tow: - If there is 8" to 10" from the bottom of the outside jack tube to the ground use a 4" tall Flip jack foot. - If there is more than 10" from the bottom of the outside jack tube to the ground use a 6" tall Flip jack foot. General Rule Average height person with trailer coupled to tow vehicle: - If the top of your trailer frame sits above the bottom of your knee cap you probably need a 6" tall Flip jack foot. - If it sits below the bottom of your knee you probably need a 4" tall Flip jack foot. The 4" Flip works best on trailers with low decks like horse trailers, flatbed trailers, some older model RV Travel trailers and small single axle trailers. The 6" Flip works best on trailers with taller decks like over the axle flatbed trailers, enclosed cargo trailers, ATV/snowmobile V-nose trailers and newer RV travel trailers.

The Flip jack foot come in two widths. One to fit a 2-1/4" jack, and one to fit a 2" jack. To find out what size jack you have measure the width of your jack above the trailer frame (as shown in the illustration to the right.) - A 2-1/4" Flip fits almost all standard tongue jacks (95+%). - A 2" Flip fits very small trailers and some electric tongue jacks.