FSR HDMI Digital Ribbon Cable - 50 Ft (DR-PCB-H15M)

Allow a high speed, high definition HDMI signal transmission over distances of up to 50ft. The FSR DR-PCB-H15M Digital Ribbon Cable utilizes a proprietary technology to allow high speed, high definition HDMI signal transmission over distances of up to 50ft. (15m). The cable hybrid copper & polymer with recently added Aramid cords increases the pull strength to 44lbs. The new smaller, RF Shielded active ends do not require an external power supply. Active circuitry embedded in the connector shells provide all the active signal buffering needed, and eliminate additional bulky electronics. Now supports HDMI 2.0 and is plenum rated. The DR-PCB-H15M cable hybrid polymer/copper structure delivers a speed of 10.2 Gb/sec video bandwidth and can easily handle 1080p Full HD, 3D, deep color, HDMI-CEC, HDCP and most newer hi-res formats. The small ribbon shaped jacket is 5mm x 2.5mm. This cable is UL listed, plenum rated, and provides optical performance at the price and simplicity of copper.   With optical-to-electronic conversion With optical-to-electronic conversion contained inside the connectors, this cable uses the same standard HDMI ports as copper cables. The DR-PCB-H15M cable requires no bulky external power connectors or extenders, instead drawing power entirely from the HDMI port without exceeding HDMI maximum power output standards. Optical communications provide immunity to electromagnetic and radio-frequency interference and offer high reliability in challenging environments such as outdoor displays, convention centers, stadiums, airports shopping malls, hospitals, factories, and other potentially high noise environments. The optical component within the ribbon cable bundle is plastic fiber rather than glass and can be installed in areas that require tight cable bends that were prohibitive with a conventional fiber bundle. At the same time, the DR-PCB-H15M cable is cost competitive with copper-based alternatives