FPVfactory Mini 5.8G 12dBi Flat Receiver Antenna High Gain Array Panel Antenna

ATA-S is modified from ATA－L 14DBI flat antenna. Keep good distance; enlarge the horizontal angle to 70degree. It has more convenience and lower price.

ATA-S is specified designed for FPV use. It use array antenna technology, specified designed for frequency of 5600~5950. It uses high quality composite electromagnetic material. ATS-S has advantage of wide effective angle, high gain, low VSWR, small size, convenience to use etc.

Recommendation: For FPV use, normally, people will use a screen with dual antenna. In this case, install a high quality four leaf clover antenna and a ATA-S will make sure you full angel and long distance.

Specially designed for RC FPV,mini size,high gain,low SWR and High self recovery function with any angle.Distance can reach 15kM with 5.8g 1200mw TX/RX,distance can reach pass 4km ,with 5.8g 500mw TX/RX.

TECHNICAL SPECIFICATION:
Model: ATA-S
Frequency Range: 5600-5950 MHz
Gain: 12dBi
VSWR: ≤1.5
3dB Horizontal Wave Width: 75°
3dB Vertical Wave Width: 40°
Polarization Way: Vertical Polarization
Front/Rear Ratio: ≥25dB
Frist subsidiary wave restrain: ≥13 dB
Max power: 50 Watt
Resistance: 50 Ω
Thunder Protection: DC Grounded

Mechanical Spec:
Connector type: RPSMA male
Size: 60×55×6mm
Weight: 18g
Material: Composite antenna material.
Working Temperature：－40° C to +65° C

ATA-S is a directional flat 12dbi antenna. It has wider angle than other flat antenna in the market. You just need to point the antenna to the rough direction of your airplane with the four square copper side.

PACKAGE CONTENT:
- 5.8G 12DBi Antenna x 1