FM Antenna 28db Signal Pre amplifier Booster

This FM antenna amplifier will boost FM signals at the antenna before there is any signal loss or noise introduced by your cable system allowing you to get all your signals to your radio. Included is a power inserter to put near the tuner and the tiny amplifer that is mounted at the antenna. It is completely weatherproof so it can be mounted out in any weather or any location your FM antenna is located. It is great for remotely mounted antennas or systems where a spliter or diplexer is used to distribute your FM signal to multiple receivers. It also helps to up signals from mono to stereo or if signals are jumping between mono and stereo or stereo and HD it will help hold it on the stereo or HD signal. Very simple to install though you do need access to the FM antenna for best results. Comes with everything you need to amplify your FM signals. Detailed instructions are included for both simple one receiver installations as well as multiple-receiver installations. This FM amplifier booster is for reception and will work with all our indoor and outdoor reception antennas. This FM amplifier will increase signal level from any FM antenna to including FM DX Antenna Co FM antennas, Winegard FM antennas, Antennacraft FM antennas, Magnum Dynalab FM antennas, Fanfare FM antennas and any other non-powered FM antenna available. The FM amplifier is also compatible with any FM tuner or receiver with an external antenna input. The antenna is supplied with the most common screw on F connector. If you would like to upgrade to a different connector for the input to your tuner or stereo choose it in the connector option below. Power Supply: AC110-120V ac 60HZ Output: 9V dc 100mA Gain: 28db 80-110 MHz including the US Domestic FM Broadcast Band 88-108 MHz Shipping is free via USPS Priority Mail in the US and is only actual shipping cost elsewhere.