FJM Security SX-776 Cable Lock Alarm with Piercing 120 Decibel Siren

Cable Alarm Lock

This Lock Alarm is an innovative, portable device suitable for securing virtually any items from theft. The Lock Alarm has an ear piercing siren that will scare away potential thieves. When an attempt is made to cut through its ultra hard steel cable, or attack the main lock unit, the alarm starts screaming!

24 Hour Protection for

Bicycles, BBQ's, Boats & Outboards, Camping & RV Gear, Construction Equipment, Firearms, Garden/Farm Machinery, Golf Clubs, Motorcycles & Scooters, Outdoor Furniture, Power Tools, Pick up Truck Loads, Skis & Snowboards, Spare Tyres, Trailers, Watersports Equipment, Notebook Computer Safety, Luggage… In fact, you name it, this lock will secure it!

Using the Cable Alarm Lock

The alarm sounds when:

• The cable is severed
• The Alarm Lock is tilted, shaken or moved while the optional alarm feature is set

How to reset the combination

While on the current opening combination, press in the small red button on left side of dials

While keeping the button pushed in, set the combination to your desired combination

Release the button and your combination is set

Using the Cable Alarm Lock

The Cable Alarm features a 2 level motion alarm that you can activate when you lock the unit.

The chirping sound warns that the motion alarm is active. If the movement continues, or the cable is severed, the alarm:

1. Beeps four times, then
2. Sirens for 45 seconds and then
3. Rearms itself to the current sensitivity level

The available Sensitivity Levels

Level 1 - Low sensitivity- motion alarm sirens after 8 seconds of continuous movement

Level 2 - HIgh Sensitivity- The motion alarm sirens after 4 seconds of continuous movement

Activating Level 1 Alarm

Press the alarm button (red button) until you hear 2 beeps and then release the button

The status light flashes twice every second indicating that the motion alarm is armed at low sensitivity

If you need to turn off the alarm, just turn the dials to the opening combination and push the cable release button

Activating Level 2 Alarm

Press the alarm button (red button) until you hear 2 beeps and press the alarm button again.

The status light flashes three times every second indicating that the motion alarm is armed at high sensitivity

If you need to turn off the alarm, just turn the dials to the opening combination and push the cable release button