Extech MO210 Pocket Size Moisture Meter with 2-in-1 Digital LCD Readout and Analog Bargraph

Extech MO210 Pocket Size Moisture Meter, 2-in-1 Digital LCD Readout and Analog Bargraph, Replaceable Threaded Measurement Electrode Pins, Auto Power Off Conserves Battery Energy

This Pocket Moisture Meter from Extech allows you to quickly assess whether wood and other porous materials have endured any water incursion. Simply push the sharply pointed electrode pins into the surface of sheetrock, drywall, wallboard, concrete, mortar, plaster or other building materials and the device will detect moisture levels between 0.2% to 2.4%. Slide the material-selection switch to wood and the handheld meter will determine moisture presence in timber from 6% to 44%. Complete with protective cap, replacement pins, and three CR-2032 button batteries.

• 2-in-1 Digital LCD readout and analog bargraph
• Use on wall board, sheet rock, cardboard, plaster, concrete, and mortar
• Replaceable threaded measurement electrode pins
• Self-contained, pocket sized meter with belt clip
• Impact proof housing
• Auto power off conserves battery energy
• Battery operated for on-the-go measurements
• Built-in battery check and measurement verification test
• Complete with protective cap, replacement pins, and three CR-2032 button batteries

• Wood Moisture Range: 6 to 44%
• Basic Accuracy: ±1%
• Other Building Materials: 0.2 to 2.0%
• Basic Accuracy: ±0.1%
• Measurement principle: Electrical resistance
• Electrode length: 0.3" (8mm)
• Electrode pins: Integrated, replaceable
• Auto Power Off: After approx. 15 minutes
• Operating Temperature: 32 to 104°F (0 to 40°C)
• Operating Humidity: 85% Relative Humidity maximum
• Power supply: Three CR-2032 button cells
• Dimensions: 5.1" x 1.6" x 1.0" (130 x 40 x 25mm)
• Weight: 3.5 oz (100g)