Etekcity HDMI Extender over Single 50m/164ft Cat5e/Cat6 Ethernet Cable with Bi-directional IR Remote Control and Smart EDID Management

The Etekcity Hdmi Extender extends your HDMI signal with zero signal loss over long distances by sending the signal over ONE single CAT5e or CAT6 cable.

Most HDMI over CAT5e/6 cable extenders require you to use 2 CAT5e/6 cables. This can be burdensome especially if you already have a single pre-existing cable already run through your walls. If that is the case then you can just use this single UTP cable extender and not have to deal with the 2 cable setup.

The installation of these extenders is quick and easy, simply place Sender unit next to your HDTV source such as a DVD player, place the Receiver unit next to your display, then connect 1 x Cat5e or Cat6 cable and you are done. The signal will be sent with perfect audio and video quality.

Features
Bi-directional IR system allowing for control of source or display (IR accessories included)
Uses a single UTP (CAT 5E or CAT6) cable to substitute HDMI cable to achieve long distance transmission (CAT5e/6 cable not included)
Transmission distance reaches up to 150ft (50M) under the video format of 1080p, and will extend even further at lower resolutions
Auto adjustment of feedback, equalization, and amplification
HDCP Compliant and ROHS Compliant
Supported Resolutions: 480i up to 1080p
Supports 3D Video and Deep Color up to 36 bit
Supports lossless compressed digital audio: Dolby TrueHD, DTS-HD Master Audio
Metal shell screens out EMI (electromagnetic interference) and RFI (radio frequency)

Package Includes
1 x HDMI Transmitter
1 x HDMI Receiver
1 x Windband  IR TX Cable(IR Blaster)
1 x Windband IR RX Cable(IR Receiver)
2 x 5V1A DC Power Adapters
1 x User's Manual