Enphase Energy ET17-240-BULK Trunk Cable 240VAC Landscape Layout
Enphase Energy ET17-240-BULK Trunk Cable 240VAC - Landscape Layout Note: Sold Per Connector The M215 incorporates DC connectors and an AC connector. However, there is no integral AC cable on the M215. The Enphase Cabling System accomplishes the AC connection. The Engage Cable is a continuous length of 12AWG, outdoor rated cable with pre-installed connectors for Enphase Microinverters to plug into. The cable is handled like standard outdoor-rated electrical wire, allowing it to be cut, spliced and extended as needed. The gap between connectors on the cable can be either 1.025 meters (40�) or 1.7 meters (67�). The 1.025 meter spacing is best suited for connecting PV modules installed in portrait mode, while the 1.7 meter gap is best suited to PV modules installed in landscape mode. The voltage types are either 240VAC split phase or 208VAC three phase. All cable connectors bear labels indicating their cable voltage designation. Typically used for residential applications, 240VAC includes four conductors. Installation: Roll out the desired length of cable and cut it to size Wire one end directly into the junction box at the head of the branch circuit The other end is sealed from the environment using an Enphase Branch Terminator Plug the M215 AC cable connectors into the regularly-spaced connectors Features of the ET17-240-BULK: 240VAC; 4 conductors Landscape Module Orientation Connector Spacing: 1.7 m (67�) For use with the M215 240V Micro-Inverter only Also Known As: ET17.240.BULK, ET17 240 BULK, ET17_240_BULK, ET17240BULK SpecificationsBrand: Enphase Energy  Output Voltage: 240V