Elga CLXXXUVM2 Purelab Classic UV Water Purification System, 18.2 Megohm Resistivity, 1 to 3 ppb TOC, 2 LPM, Type 1 Standard
The Elga CLXXXUVM2 Purelab Classic UV water purification system has total organic carbon (TOC) monitoring, 18.2 megohm-cm resistivity, and a point-of-use dispenser with programmable volume control and 2 liters per minute (LPM) delivery. It has a dual-wavelength (185/254nm) UV lamp for photo-oxidation of feed water that reduces TOC levels to less than 3 parts per billion (ppb). The system requires up to two deionization cartridges (sold separately) for operation, and also requires potable water pretreated by reverse osmosis, ion exchange, or distillation. It has an inlet water pressure range of 1.0 to 10psi. The microprocessor-controlled digital display shows purification system values and has programmable volume control. The system accepts 100-240V, 50/60Hz input voltage and draws 75W of power. This Type 1 water purification system is suitable for molecular biology, microbiology, and analytical chemistry applications.
| Specifications | |
|---|---|
| Resistance | 18.2 megohm-cm |
| Total organic carbon (TOC) | 1 to 3ppb |
| Ultrafiltration membrane | No |
| UV lamp | Dual range (185/254nm) |
| Flow rate | Up to 2LPM |
| Feed water pretreatment requirements | Potable water pretreated by reverse osmosis, ion exchange, or distillation |
| Feed water pressure range | 1.0 to 10psi |
| Display | Microprocessor-controlled digital |
| Input power | 100 to 240V, 50/60Hz, 75W |
| Dimensions | 490 x 410 x 365mm (H x W x D) |
H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Elga LabWater manufactures water treatment solutions for laboratory, research, and healthcare industries. The company, a subsidiary of Veolia Water Solutions and Technologies, was founded in 1937 and is headquartered in High Wycombe, Buckinghamshire, UK.
