Electro Acupuncture Machine - Electro Acupuncture Device ITO ES 130 Replaces The IC-1107+.

The new ITO ES-130, this model replaces the popular IC-1107+. This new model is designed and calibrated to meet all essential safety and regulatory industry standards. Featuring a High/Low switch on the back of the unit, the switch is toggled to Low to facilitate use with needles or to High for MEA electro-therapy. It offers three independently controlled output channels with adjustable frequency indicated by a flashing light. The waveform is a unique biphasic pulse which has been designed to minimize electrolysis damage to the needle. The pocket portable ES-130 is the smallest and smartest looking professional electro-therapy unit in the world, for use in or out of the office. This unit is not equipped with a point locator. Accessories include 3 sets of new CE wire leads with rectangular CE jack, carrying case, and instructions. Does not include battery. Converter Jack (sold separately) converts rectangular CE jack to 3.5mm jack for use with all 3.5mm jack accessories. Note: When using 9-volt Duracell Batteries with the ES-130, a thin shim (or paper) must be placed at the bottom of the battery to make proper contact (ie, Duracell are shorter in length). Also, in order to use the built-in battery check (located on the back side of unit), power must be turned on. Specifications: 500 ohm test load Output channels 3 independent intensity channels Frequency L - 1 to 20 Hz (adjusted with M - 20 to 150 Hz fine frequency dial) L - 1 to 20 Hz M - 20 to 150 Hz H - 150 to 500 Hz Low volts & current 0 to 10 volts, 0 to 20 milliamps Hi volts & current 0 to 20 volts, 0 to 40 milliamps Voltage, max 30 volts (100 kohm load) Pulse width 100 microseconds (µS) Pulse shape asymmetric biphasic square wave Pulse mode continuous Power source one 9 volt battery (not included, Energizer brand recommended) Freq indicator flashing red light Size, wt, color 4.5" x 3.2" x 1.2", 0.3 lbs, gray.