E-flite 30-Amp Pro Switch-Mode BEC Brushless ESC V2 EFLA1030B Speed Controls Aircraft

This is the E-Flite V2 30-amp pro switch-mode brushless ESC.

Features:

• Up to 30 amps continuous current with proper air flow and 35amps burst current (15 seconds)
• 3.5A continuous current, 5V Switch-Mode BEC Circuit
• Stronger BEC for support of most 3-axis stabilizationsystems
• Drive up to 7 analog or 6 digital standard-size servos withthe BEC
• 3- to 4-cell Li-Po, 9- to 12-cell Ni-MH/Ni-Cd input voltage
• Programmable motor braking
• Safe power-arm mode prevents accidental starts
• Programmable low voltage cutoff with settings for 3-cellLi-Po (9.2V), 4-cell Li-Po (12V) or 74% of battery starting voltage
• Programmable throttle input range (1.1ms-1.9ms or1.2ms-1.8ms)
• Programmable soft start for helis and airplanes
• Auto motor shut down if signal is lost or there is interference
• Programmable timing-5 user-selectable ranges for use with alarge variety of brushless motors
• Pre-wired connectors-E-Flite EC3TM connector on battery inputand 3.5mm gold bullet connectors on motor output leads