EcoSmart ECO 8 Tankless Water Heater, Electric, 8-kW - Quantity 1, 12 x 8 x 4

This Smart Technology electric tankless water heater is configured as a "whole home" model for one bathroom residences in climates where incoming water temperature is 67°F and above. This model is well suited for heating nearly 1.5 gallons per minute to 105°F at that inlet temperature, which is the equivalent of one water saver shower head. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 8 requires a minimum 100 amp electrical panel for installation with (1) 40 amp double pole breaker connected to (1) set of #8 awg wire. Plumbing connections are 1/2" compression fitting with the option of 1/2" NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.