EDEN ALK1 Mineral ORP Inline Water Filter 2.5"x12"

An inline alkaline filter that is 2.5 inch in outside diameter and 12" in length with 1/4" FNPT ports. This filter by EDEN has a service life of one year or 2,000 gallons and a maximum flow rate of 0.5 gpm. The filter contains a special blend of media that includes ceramic balls with bio energy, far infrared, mineral and alkaline properties, mineral stones, and Oxidation Reduction Potential (ORP) media. The filter re-mineralizes and raises the pH of your purified water by at least 1.5 to 2.5 points. Initial testing of pH showed a reading in the range 9.6-10.0. With use, pH is expected to go down gradually. By adding this inline filter to a reverse osmosis (RO) system, you get the optimum benefit of the alkaline-mineral-ORP media: a higher pH, higher mineral content, and lower ORP. This Alkaline/Mineral/ORP filter may be accurately described as: natural alkalizer/ionizer/mineralizer/oxidizer! This filter is Stage 6 of EDEN 6-Stage Alkaline RO System (SKU: RO6-100-ALK; ASIN: B00B56JAIG). The purchase of this filter does NOT include the quick connect fittings or any clips. To complete the job, consider buying a kit that includes these fillings with the needed clips. You have two options for these kits: Option 1: Make the added filter an integral part of an alkaline RO System, e.g., RO6-100-ALK .Option1-Buy: S5-TO-S6 RO Kit (SKU: 2CL2520; ASIN: B00GW8T0VE). Option 2: keep the added inline filter as separate from the RO system and mount it on the wall, side of the cabinet or any surface. Option2-Buy: Mounting Clip Kit (SKU: 2CL25 ; ASIN: B00H9AT5KA); you need two screws. Some people may choose to leave the inline carbon filter as the last stage. When adding the new alkaline filter to any RO system, purified water will flow through the alkaline media before reaching the drinking water faucet. SKU: ALK1-2512-I __ UPC: 852869004381