DryWay Water-Repellent Concrete Sealer - Penetrating Silane & Siloxane for Driveways, Garages, Patios, Pool Decks, Concrete, Brick & Pavers, Flat Finish, Interior/Exterior (5-Gallons)

DryWay Water-Repellent Sealer is a penetrating sealer for concrete, brick, pavers, stucco, and other porous masonry. DryWay provides unbeatable protection against water penetration, staining, and deterioration caused salts, and harmful freeze/thaw cycles. Treated surfaces will bead or shed water for years and years, reducing cracking, pitting, spalling, efflorescence and rebar corrosion.

An advanced, water-based emulsion of silanes and siloxane, DryWay does not form a film, like acrylic sealers. Its small molecules penetrate deep below the surface and react chemically with the substrate and itself to form long-chain molecules. It's like filling the pores with silicone caulk.

The seal does not trap water-vapor and allows the substrate to breathe and dry out. DryWay is inherently resistant to UV-rays, heat, and oxidative degeneration. It is hidden deep inside the pores, hidden from the sun and elements. It will not yellow and there is no gloss.

ESTIMATED SERVICE LIFE: 10-Years.

FINISH: Clear/Flat.

COVERAGE:
- Poured Concrete: 150-200 sq.ft. per gallon
- Brick/Pavers: 125-150 sq.ft. per gallon
- Concrete Blocks: 75-125 sq.ft. per gallon
- Split Face Blocks: 50-100 sq.ft per gallon.

EXCLUSIONS: Stamped, polished concrete floors, modified hydraulic cement, fiber-reinforced concrete.