Driftwood 5 Pak Wood Stain - Create a Driftwood Weathered Wood Finish on Unfinished Wood in Minutes; Mix with Water and Apply on Furniture, Floors, Feature Walls, Wood Frames

What Will Driftwood Weathering Wood Finish Do For You?

Love that restoration look? Achieve that high end weathered look without the messy, time-consuming and costly faux paint techniques. Driftwood Weathering Wood Finish creates a beautiful driftwood weathered finish on most bare unfinished wood that contains a lot of tannins. Use on fencing, decks, siding, ceilings, banisters, moulding, frames, window boxes, beams, posts and feature walls plus more.

What's In The Box?

1 Box containing 10 packets
Instructions

Instructions

Mix 1 packet with 1 Cup of water and apply to bare wood. For application on woods high in tannins such as oak, mahogany or walnut, dilute the solution for a lighter color. Suggested dilution for woods high in tannins is up to 1 gallon of water per 2 packets.

Apply with a brush, sponge, or sprayer and see results usually within 10-15 minutes.

Product will cover approx. 275-350 sq. ft and up to 2,200-2800 sq. ft. if diluted. That's 10 cups up to 5 full gallons of solution.

What to Expect: Most woods will take on a bluish gray color - some darker than others. Try the product on an inconspicuous area first. Darken the color with a 2nd coat or lighten it by diluting the solution. Pine, birch and poplar will be lighter while oak, walnut and mahogany will be darker.

Will NOT work on woods with very low tannins such as particle board, balsa, parawood, bamboo, rubberwood or Malaysian oak or wood that has been pre-treated.

Clean up: Clean up with soap and water. Unused solution can be stored up to 3 mths in an airtight non-metal container. Dry product can be stored indefinitely.

CAUTION: Product stains skin and clothing. Avoid inhalation of powder.

RECOMMENDED TOP COAT: To protect your Driftwood Weathering Wood Finish, we recommend our Driftwood Final Finish Liquid Wax.