Dive Rite Nomad Side-Mount Butt-Plate and Bungees Kit

The Nomad Butt-Plate and Bungees Kit allow divers who wish to transform their Existing TransPac Harness and Buoyancy Compensating Wing into a Rig Capable of Side-Mounting Tanks. The Nomad Butt-Plate weaves through Standard 2" (5.1 cm) Harness Webbing on the Waist Strap and is Locked-Tight into Place using Stainless Steel TransPac Assembly Screws through Slots on the Back-Plate. Butt-Plate and Bungees comes Standard with Dive Rite's Ring Bungees and Tank Chokers. When Side-Mounting Stage Tanks or Re-Breather Bailout Bottles, Butt-Plate Rails can be difficult to access if Back-Mounted Gear Covers Them-Up. Problem solved with Dive Rite's New Tech Butt-Plate. Its Rectangular Shape places Tank Attachment Points at the Edge of the Diver's Body, while Outrigger Hardware is Easy to Find due to its Orientation Facing Outwards on the Plate. The Butt-Plate is made of Reinforced Nylon to provide the Proper amount of Rigidity to Hold Tanks in Position and Eliminate Sag. Two Stainless Steel Handles are used for Tank Attachment. Included with the Butt-Plate are Two Stainless Steel Assembly Screws for Securing Butt-Plate to a Back-Plate. The Butt-Plate is equipped with 5 Rust and Corrosion Resistant Stainless Steel Grommets, accommodates any size Crotch Strap. The Included Bungees take the guesswork out of bungee sizing with Nomad Bungee Loops. Bungees are 5/16" (8 mm) Nylon Cord Bungee Material. All Hardware is Marine-Grade 316-Stainless Steel. Nylon Cord Bungees are equip