District AL-2 V2 Bars White Large

District AL-2 V3 Bars are a hybrid scooter bar with an oversized 1 3/8 inch outer diameter and a 1 1/8 inch inner diameter. AL-2 V3 Bars are aluminum bars that require an oversized clamp. The oversized outer diameter of the AL-2 V3 Bars is due to the thicker aluminum used to create the bars, which retains the light weight of an aluminum bar, but gives you the strength of a steel bar. The standard inner diameter allows you to use these scooter bars with any threadless 1 1/8 inch fork on the market. A slit in the bars makes them compatible with ICS, IHC, and SCS compression (modification required). When using AL-2 V3 Bars with ICS compression, the compression bolt will screw up through the forks and into the star nut in your bars. When using IHC forks, an oversized clamp will be used to compress your bars to your forks. Oversized outer diameter scooter bars are not typically used with SCS compression, but may be modified for use with SCS compression by cutting 2 inches off the bars to remove the slit. Made by a high-end manufacturer like District Scooters, you can be sure you will be pleased with both the quality and price point of these scooter bars. Scooter bars are typically made out of one of two materials, steel or aluminum. Aluminum scooter bars are light weight and ideal for beginner to intermediate street riders, as well as park riders who are not catching big air and putting tremendous stress on the bars. Steel bars are heavier than aluminum bars, but provide additional durability to take on the stress of hard landings on big air tricks in the skate park.