Dispens-a-Matic FM Flex+Matic Envelope-Bag Flat Labeler/Applicator

Dispens-a-Matic Original Flex+Matic flat labelers enable the user to label all kinds of flat objects by simply setting the desired position using the digital readout and guides. Then insert the flat object. Once the object is inserted the label is applied automatically. Now, Insert the next one, as fast as you feed the machine, it will label bags, envelopes, pouches, PCBs, and even slim line CD/DVD cases. With our 5-inches per second feed, most objects are labeled in less than 2 seconds. This allows the user to quickly insert another to start the procedure again. Once a rhythm is established objects are labeled very quickly. Loading is a "snap", just feed the labels between the dispensing tables then through the patented feed-roll assembly and "snap" into place. It can hold repetitive vertical positioning to 1/16th of an inch or less on most objects. Holds 1/64th of an inch horizontal accuracy on most objects. Able to handle most plastic bags without difficulty. Labels over 1200 pcs per hour with average dexterity. Label objects to 14-inches width. Dispensing Tables: formed out of 6061-T6 Aluminum. The peel edge is hand milled to spec within 0.001-inches using a special hand-made cutting tool to get that perfect peeling edge needed to dispense labels without tearing the backing paper. Dispensing tables are polished with ultra-fine polishing compound so paper flows freely around the plate. Side frames: laser-cut from the drawing quality steel then formed, countersunk, de burred, and inspected one at a time at our facility. The Flex+Matic uses Dual motors that are shaded pole AC, and made in the USA to our specifications (No cheap 12V motors here).