Dispens-a-Matic BM10RW 10" Bottle-Matic Labeler/Applicator with Waste Winder

Dispens-a-Matic Original Bottle-Matic bottle labelers with waste winder enable the user to accurately label all kinds of cylindrical objects. Insert the container and press the foot switch. Once the foot switch is activated the label is applied at over 4.5-inches per second, most water bottles are labeled in less than 2 seconds. Most bottles are labeled in less than 3 seconds. This allows the user to quickly remove the container and insert another to start the procedure again. Once a rhythm is established bottles are labeled very quickly. Loading is a "snap", just feed the labels between the dispensing tables then through the patented feed-roll assembly and "snap" into place. 10-inches model for smaller containers to 1-inches to 9-inches body height, great for cosmetics (Bottle neck can extend beyond machine). Holds 1/64th of an inch side-side accuracy on most containers. Able to handle most tapered containers by simply adjusting the idle roller position. Labels 1200 pcs per hour with average dexterity. Side frames: laser-cut from the drawing quality steel then formed, countersunk, de burred, and inspected one at a time at our facility. Dispensing Tables: formed out of 6061-T6 Aluminum. The peel edge is hand milled to spec within 0.001-inches using a special hand-made cutting tool to get that perfect peeling edge needed to dispense labels without tearing the backing paper. Dispensing tables are polished with ultra-fine polishing compound so paper flows freely around the plate. Bottle-Matic uses Dual AC shaded pole gear motors, made in the USA, to our specifications. (no cheap DC motors here).