Diamond-Amplification-SA2100-Spitfire-II-10W-Guitar-Amplifier

The Spitfire II (the two channel version) sports the original Spitfire I's voicing in Channel 1 and a full, rich vintage higher gain Channel 2 with DA's signature dual volume, gain design. Channel 2's voicing is big and tight like the best of the vintage heads with an updated feel featuring plenty of lows and mids. The Spitfires now also feature a "half-power" switch allowing the power rating to be changed from 100 to 50w with the flip of a switch. The Spitfire line also features DA's signature "low focus" switch on the rear panel. The low focus switch provides 3 positions - low, mid, high. Moving from low to high focuses the low end relative to the mids and highs as well as creates an evenness across all the strings to the high E is not overrung by the low E. To retain versatility and functionality, all the Spitfire products have a real, correctly-designed effects loop. You do not need a foot switch; you do not have to push a button. Just plug a cable into the effects send and the loop activates. The loop is tube buffered and will not affect your tone. The front panel features a master volume, which reads E. Return (effects return). When the loop is on, the E. Return knob acts as the amp's overall master (turn this knob up or down to increase or decrease the amps overall volume) and the volume control for each channel acts as the effects send level control. When the loop is off, each channel's volume control acts as that channel's master volume. Like all current and future Diamond Amplification products, the Spitfire features the highest quality components and construction. Every component was selected and tested for this head. The Spitfire features 12AX7 or ECC83 preamp tubes and 4 Svetlana "Winged C" EL34's for its power stage. Each part was personally spec'd and tested by us to ensure maximum performance and reliability, from the transformers to the switches and knobs.