Dhorcas Clock Motor kit and Curvy Long 9" Hands with Hanger, Quartz Clock Movement Kit for Replacement and DIY (1/4" Thread Shaft w/Hanger)
One #6262 High Torque Quartz Clock Movement with a total shaft length of 1/2", and a threaded shaft of 3/16", therefore, we suggest that the thickness of your dial or clock's face cannot be more than 2/16" so there will be enough space to screw the nut unto the shaft to hold your dial/face in place. For other shaft then visit our other listings This kit also includes a silver metal hanger black metal hour and minute hands (no second hand) that are longer than the average hands. The hands have a lovely Big Ben clock design, very light metal, and comes with a plastic protection film that you peel off. Also comes with an instruction sheet. Requires one AA battery to operate (not included). MINUTE HAND LENGTH: 12" in total length and from the shaft hole it is 8 /34". HOUR HAND LENGTH: 9" in total length and from the shaft hole it is 6". SECOND HAND: NONE only a brass cap. / HOOK/HANGER: Clock hook mechanism hanger SIZE: 6x2cm (2 1/2" x 3/4") HOLE: 9/16" circumference. / Fits over ours and most clock mechanism shaft and will be held in place by your clock dial/face/plate. No additional washers or Nuts than the ones that comes with the motor movement are included.