DROK 091013 LM2596 DC Buck Voltage Regulator 36V to 24V 12V 5V 3.3V 3V Converters Constant Volt and Amp 5-36V to 1.25-32V 5A 75W

Parameters:
Input voltage : 5-36V
Output voltage :1.25-32V（continuously adjustable, default output 17V）
Output current : 5A MAX(Please use within 4.5A)
Output power: Max 75W (Please use within 50W; reduce power if pressure difference is big)
Operating temperature: -40 to +85 ° C
Operating frequency: 180KHz
Conversion efficiency : up to 96%
Input reverse polarity protection: No, (if need, please link input in series to high current diode)
Installation: 4pcsx 3mm screws
Wiring:(solder terminals) V-IN is the input, V-OUT is the output

Usage:
1. Use as an ordinary buck module with overcurrent protection capabilities
2. Use as a battery charger
3. Use it as a constant current LED driver module

Note:
1.If the module can not be adjusted, the output voltage is always equal to the input voltage." When you encounter this problem, please counterclockwise rotation of the potentiometer 10 laps or more, then you can adjust the output voltage. Because the factory default output voltage is 17V.
2.Module output terminal string has a current sampling resistor, there will be 0-0.2V voltage drop after connected to the load, it is a normal phenomenon.
3.If its output is more than 3A/35W, please enhance heat dissipation!
4.This DC converter is single output, the output voltage of the USB port is the same as the output voltage of the module, if your load is USB device, please make sure the module's output voltage is set at 5V.
Package include:
1 x DC/DC Buck Converter