DMX512 2.4GHz Cable DMX Dfi DJ Wireless system Transmitter Receiver Connector

DMX512 2.4GHz Wireless Transmitter / Receiver Module

Operating manual：

1. ID code and LED color corresponding relateship：

l 1：RED

l 2：GREEN

l 3：RED+GREED

l 4：BLUE

l 5：RED+BLUE

l 6：GREEN+BLUE

l 7：RED+GREED+BLUE

2. Press key 1 time to indicate ID setting,，Press again to set ID，then ID value adding 1 each time.by press

3. Working condition：

l LED constant lit up：no DMX or wireless singal.

l Red LED flash：transmitting.

l Green LED flash：receiveing

4. RF frequency- - - - - - - - - - - - 2. 400-2. 525 G，total 126 channels，it's searching automaticly,

5. ID Code- - - -"1-7" groups ID code，press "KEY" for setting，it only can works under same ID code.of transmitter and receiver. Establishing Communication：

1. Power on DMX512 wireless received board and transmitted board.

2. Press "Key" button to set same ID value of transmitted board and received board., please use different ID value if you need use more than 1 group wireless net at same time in same place.

3. The red LED flashs when transmitter transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section. Green LED flash till received corrected same ID value, LED flash more fast once DMX data more fast.

4. Communication was established correctly then

Cauction：

² Don't repair this R/T board by yourself, it should be returned to manufacturer to repair if any problems.

Packing Included

1 x DMX512 module

1 x DC 5V Power Supply