DISTANCER DT1X4 HDMI Extender by TCP/IP Over Ethernet Over Single RJ45 Cat5e Cat6 Cable Enhanced Version(1xTransmitter and 4xReceivers Set) with IR Support 1080p HDMI 1.3, HDCP 1.2, 1.1, TCP/IP Standard up to 328ft(100m)

INTRODUCTION
-PW-DT1X4 is extended against the company's network and enhanced network transmission solutions. The products are divided into PW-DT1X4T, PW-DT100R, PW-DT1X4T is integrated RJ45 ports, it can connect four PW-DT100R. And PW-DT100R can be cascaded directly through the network cable, the system built-in IR control function back.
-HDMI Over Ethernet is based on TCP/IP standard, so you can use IP switch box. It transmits your HD display with the high resolutions up to 328 feet (100 meters) away from your HDMI or DVI-D source by using one CAT5e/6 cable. With the advantage of TCP/IP standard you can extend your HD video to multiple displays by using an Ethernet Switch.
SPECIFICATIONS
HDTV Resolutions: 480p,576p,720p,1080p
Audio: Sample rate: 32kHz, 44.1kHz and 48kHz
IR remote control: 38KHz; NEC
HDMI: HDMI 1.3
HDCP: HDCP 1.2
Power adapter: Input: 100V - 240V (50 - 60Hz)
Operating Temperature/Humidity: 0- 70 degrees/10% - 80%RH(no condensation)
Storage Temperature/Humidity: -10 - 80 degrees/ 5% -90% RH(no condensation)
CONNECTION AND OPERATION
1) Connect HDMI receiver and display device with the HDMI cable(When connecting multiple devices RX, RX need to modify the IP address and the MAC address).
2) For infrared back control function, the infrared receiver access to the transmitter, infrared emission head access the receiver, and emission control equipment head aligned with their needs infrared receiver port.
3) POWER on the sending and receiving devices. When the status lights and flashes, the device starts normal.
WARRANTY
-1 year warranty
-After you receive our products, if you feel satisfied with us, please give us a feedback as an encouragement, if not, please contact us and we will serve you until you are satisfied