D.H.S. Heavy Duty Leg Leveler (set of 2)

For serious loads you need a serious leveler!!!

There's a whole lot to love about this set of leg levelers from D.H.S. Installation is an absolute breeze. Just hook it under whatever you're looking to support, and attach with the screws provided. It's so easy, you can get a set of 4 installed in about 5 minutes (and that assumes you're taking it easy).

Once they're in, just back them out (up to 2 1/4") until your piece is perfectly level... Done! The 1 1/4" wide foot has a nylon cap which keeps moisture away from the leg while protecting your floors at the same time. While you can use an Allan wrench from above to adjust the feet, you might find it a lot quicker to temporarily lift the cabinet with the aid of a pry bar and back out the foot the desired distance with your fingers.

Quick tip... If you're concerned with vibration loosening the leg over time, try taking the legs all the way out of the brackets and threading on some 3/8" nuts all the way down to the base. Then re-install the leg into the bracket as before. Once the unit is dead level, just screw the nut up till it engages the bottom of the bracket and give it a quarter turn to lock it in!