DBPOWER-858D110V-Hot-Air-Gun-Digital-Rework-Soldering-Station-BGA-Reballing-with-Ajustable-Blower

Description:
To put the unsoldering equipment ready, and leave handle on the holder
To connect the power
To set the blast nozzle (large caliber nozzle preferred).
To switch on the power, the screen display"-", it represents standby model(Available in microcomputer with digital LED)
To press UP or DOWN button(revolving switch )as to set up the temperature.(available in microcomputer with digital LED)
To turn the temperature switch as to set up the required temperature.(Available in luminous discharge tube display indication)
To hold the handle, so the equipment begin to heat.
To adjust the revolving switch of airflow in order to select suitable airflow, and begin to operate normally while the temperature is table.
To put back the handle on the holder after the work; meanwhile, the unsoldering equipment switch from heating mode to cooling heating element mode automatically. while the temperature is lower than 100 centigrade,the screen displays"-", it stands for switching to standby mode, and after the temperature of heating element is less than 70 centigrade,the equipment is on standby(if there is airflow out, it means the temperature is higher than 70 centigrade; and there is no airflow only after the temperature is lower than 70 centigrade)
To switch off the power unplug if there is no operation for a long period of time

Specification:
Model: 858D
Power consumption: 700W
Gun Temperature range: 100-480 centigrade
Gun heater materical: Ferro-alloys
Gun heater resistance: 74 omega
Gun type: Brushless fan air flow: 120L/min
Product weight: 2kg

Attention: Try to set up the temperature as lower as possible and the airflow as much as possible as to keep heating element working and protect IC chips.

Packing includes:
1 x 858D-110V Hot Air Gun Rework Station
1 x US Power Plug