Crosby G2160 7T Steel Sling Shackle (1021256)

• All sizes Quenched and Tempered for maximum strength.
• Forged alloy steel from 7 through 300 metric tons.
• Cast alloy steel from 400 through 1550 metric tons.
• Sizes 300 metric tons and smaller are proof tested to 2 times the Working Load Limit.
• Sizes 400 metric tons and larger are tested to 1.
33 times Working Load Limit.
• All ratings are in metric tons, embossed on side of bow.
• G-2160, (7-55t), are Hot Dip Galvanized and pins are painted red.
• G-2160, (75t and larger), bows are furnished Dimetcoted, and pins are Dimetcoted, then painted red.
• S-2160 bows and pins are painted red.
• Shackles, 30t and larger, are RFID EQUIPPED.
• Can be used to connect HIGH STRENGTH Synthetic Web Slings, HIGH STRENGTH Synthetic Round Slings or Wire Rope Slings.
• Increase in shackle bow radius provides minimum 58% gain in sling bearing surface and eliminates need for a thimble.
• Increases usable sling strength minimum of 15% and greatly improves life of wire rope slings.
• Pin is non-rotating, with weld-on handles for easier use (75t and larger).
• Approved for use at -40 degree C (-40 degree F) to 204 degree C (400 degree F).
• Bow and bolt are Certified to meet charpy impact testing of 42 joules (31 ft-lbs) min.
ave.
at -20 degree C (-4 degree F).
• All 2160 shackles are individually proof tested and magnetic particle inspected.
Crosby certification available at time of order.
• Shackles requiring ABS, Lloyds and other certifications are available upon special request and must be specified at time of order.
• Shackles 18t and larger have DNV Type Approval to Rules for Certification of Lifting Appliances, and are produced in accordance with DNV MSA requirements.