Complete Phone Paging Ringing System with 3 Speakers (Indoor/Outdoor) and Power Supply
Add Paging and Multiple Line Loud Ringing to Any Phone System. The PA-2A provides loud ringing and paging to elec-tronic key systems, 1A2 Key systems, PABXs as well as No-KSU phones and multiline phones. Paging is accomplished by connecting the PA2A to a paging port or unused telephone line input (trunk port) of nearly any phone system.
The Viking PA-2A will also generate adjustable loud ringing from up to 6 analog lines or from a dry contact clo-sure. Either a loud electronic warble, or one of three other soft chime sounds may be selected. An external night transfer switch can be added to turn loud ringing on or off in night bell applications.
The Viking PA2A is easy to install and eliminates the installation of multiple bells, relays and paging cards. The unit comes complete with a power, amplifier, and 3 weather resistant high quality paging horns.
Specifications: Night bell Loud ringing Two watts of paging power All lines are optically coupled for use with fax switches and analog PABX/KSU stations Can provide background music from an external source Paging from an unused trunk port or paging port Four loud ringing sounds: Electronic warble - Double gong - Quadruple chime - Door chime (ding-dong) Provides loud ringing or night bell, from 1-6 lines for warehouses, yards, etc. Output for controlling a 12 volt relay from 1-6 ringing lines Page alert tone 600 ohm output for sourcing high powered amplifiers Power: 120V AC/13.8V AC 1.25A, UL listed adapter provided
Dimensions: 133mm x 89mm x 44mm (5.25 x 3.5 x 1.75) Paging Output: 2 watts - powers up to (3) 8 ohm or (16) 45 ohm speakers Sound Pressure: 110 dB 1 meter (warble) Speakers: (3) 8 ohm paging horn included, (3) maximum Maximum Speaker Run: 91m (300 ft) maximum 18 AWG Talk Battery: 24V DC Connections: (2) RJ25 jacks, (1) 10 position screw terminal block