Cokin Filter Holder for L (Z) Series Filters (BZ100A) - Requires L (Z) Series Adapter Ring, Black

The new Z-PRO Filter-Holder is designed to fit both FILM and DIGITAL technologies in particular D-SLRs and VIDEO/ BROADCAST cameras, either semi-professional or professional models (among them the new HD format). It is modular, it can be easily dismantled and set-up to be able to accept filters of 1.6mm thickness (which most photographers use), and 4.0mm thickness (often used in the Broadcast segment in popular dimensions such as 100x100mm (4"x4") and 100x150mm (4"x6"). To prevent the risk of vignetting (dark edges around the picture), the Z-PRO series filter-holder is fully reversible, which means that a filter can fit in the adaptor ring's slot and the adaptor ring can be fit in the first filter slot. Therefore the filter can be positioned very close to the lens and the edges of the holder are no longer an obstacle in the field of view. The Z-PRO filter-holder was tested (in the standard 3-slot version) and proved no vignetting on focal lengths down to 20mm (based on35mm format) but of course, this can go further wide in the wide-angle configurations. The Z-PRO filter-holder will fit a large variety of lenses thanks to a range of adaptor rings covering the popular diameters of 49mmup to 96mm. Additional rings designed for Hasselblad B60/B70 and Rollei are also available. The entire Z-PRO system is ideal to work with the newest generation of Digital SLR and Video cameras. The Z-PRO range of filters is made of organic glas