Cobra 2204-32 1960 Kv Brushless Motor for Multirotors - Perfect for 250 class quads!

The Cobra CM-2204 series motors have a 3.0mm motor shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Since these motors are typically soldered directly to the speed controller to save weight, the 2204 motors come without bullet connectors and feature extended pre-tinned motor leads that are 4-1/2 inches (110mm) long. These motors also have 3mm threaded holes in a 16x19mm pattern on the back plate for easy installation on your model.

The newest version of the CM-2204 series motors feature an integrated 5mm threaded motor shaft which eliminates the chance of having a prop adapter spin off in flight. The included prop washer and nylon insert prop nut provides a solid attachment for your propellers that will not loosen up and slip during use.

Cobra 2204/32 Motor Specifications

Stator Diameter: 22.0 mm (0.866 in)
Stator Thickness: 4.0 mm (0.157 in)
Number of Stator Slots: 12
Number of Magnet Poles: 14
Motor Wind: 32 Turn Delta
Motor Kv Value: 1960 RPM per Volt
No Load Current (Io): 0.58 Amps @ 8 Volts
Motor Resistance (Rm) per Phase: 0.153 Ohms
Motor Resistance (Rm) Phase to Phase: 0.102 Ohms
Maximum Continuous Current: 13 Amps
Max Continuous Power (2-cell Li-Po): 90 Watts
Max Continuous Power (3-cell Li-Po): 140 Watts
Motor Weight: 24.6 grams (0.87 oz.)
Outside Diameter: 27.0 mm (1.063 in.)
Shaft Diameter: 3.00 mm (0.118 in.)
Motor Body Length: 14.2 mm (0.559 in.)
Overall Shaft Length: 32.5 mm (1.145 in.)
Motor Timing: 5-10 degrees
PWM Frequency: 8 KHz