Celestron Hybrid .965" to 1.25" Diagonal with Two 1.25" Eyepieces 8mm & 20mm

With this Celestron three piece accessory kit you can use 1.25" eyepieces in telescopes that have a .965" focuser. This kit is not for reflecting (Newtonian) telescopes. Eyepieces: You don't have to spend a lot on eyepiece. These 8mm and 20mm Celestron eyepieces are very attractively priced for any budget. The cost of eyepieces can really add up! Not everyone has $50 to spend on an eyepiece. The anodized aluminum barrel is precisely machined and internally blackened to prevent stray light reflections. Also it is threaded to accept standard filters. Fits Celestron, Meade, Orion, Konus, Tasco, Bushnell, and Cstar telescopes that have a .965" focuser. Not for reflecting (Newtonian) telescopes. Eyepieces were part of an accessory kit that came with a Celestron telescope. Therefore they do not come in a box or have Celestron's name on them. Both come packaged in plastic bags. Erect Image Diagonal: This Celestron .965" to 1.25" erect image diagonal uses an Amici prism design. This design allows you to look into the telescope at a 45° angle, at images that are oriented properly, meaning the image is upright and correct from left to right. Housing is made of plastic. Diagonal was part of an accessory kit that came with a Celestron telescope. Therefore does not come in a box and it does not have Celestron's name on it. Comes packaged in plastic bag. Fits many different brands of telescopes: Celestron, Meade, Orion, Konus, Tasco, Bushnell, and Cstar telescopes that have a .965" focuser. Diagonal was part of an accessory kit that came with a Celestron telescope. Therefore does not come in a box and it does not have Celestron's name on it. Comes packaged in plastic bag.