Cablesson HDelity HDMI 3D Dual Cat5/6 (Bi-Directional IR, 3D and Single Power)

The Cablesson EP-10S HDMI Extender over Dual Cat.X with Bi-directional IR & Single Power sourceboosts your audio/video transmission distance up to 60m (200ft) in HDTV 1080i format, 40m (130ft) in HDTV 1080p format, and 20m (65ft) in HDTV 1080p with 36 bit color depth. With two cost effective solid Cat-5/5e/6 UTP/STP cable, users can readily extend HDTV sources from DVD players, Blu-ray Disc player, PS3, PC, and any other kinds of sources compliant with TMDS to distant display monitors including HDMI or DVI enabled TV sets or LCD PC monitors. The EP-10S also features with embedded IR input and output on both Transmitting and Receiving units so users can control the source device or HDMI display at romote site via IR remote in di-directional IR pass-through. The EP-10S includes two units: Transmitting unit and Receiving unit. The Transmitting unit sends the HDMI or DVI signals received from the source device and receives IR signals from the Receiving unit or sends the received IR signal from the Transmitting unit via two low cost Cat-5/5e/6 cables. The Receiving unit is responsible for equalizing the audio/video data received from the Transmitting unit and sends the IR signals received from the IR Receiving to the Transmitting unit or receives IR signals from the Transmitting unit . The transmission distance between the audio/video source and the display can be up to 60m (200ft) at HD resolution (720p/1080i), or 40m (130ft) at Full HD resolution (1080p). With 8-level digital signal equalization control on the Receiving unit, users can adjust the signal level equalization scale to the received audio/video signals, and therefore optimize the transmission distance between source and display.