CTC-Tech-SkyRC-E4-AC-RC-Battery-Balance-Charger-2S-3S-4S-Cell-LiPo-LiFe-1A3A-Output

CHARGE PROCEDURES:

1. Insert the AC power cord into the charger.
2. Insert the AC cord into a wall socket (100-240V). All LEDS will light for 1 second and the charge status LED will flash green which indicates the charger is ready to charge.
3. Select the battery type LiPo/LiFe by the toggle switch.
4. Select the proper charging current 1A/2A/3A by the toggle switch.
5. Connect the battery main charge lead to battery socket which is in the front side of the charger and battery balance wire to balance port which is in the right side of the charger.
6. The charger starts charging. The charge status LED and the cell status LED will glow constant red. If the battery pack is 2-cell, Cell 1 and Cell 2 LEDs will glow constant red; if the battery pack is 3-cell, Cell 1, Cell 2 and Cell 3 LEDs will glow constant red; and so on.

7. During the charging progress, when the charge status LED glows constant red, the charger is charging in CC mode; when the charge status LED glows constant orange, the charger is charging in CV mode;
8. When the cell LED is flashing, this cell is discharging for balancing.
9. When the battery is fully charged, the charge status LED will glow constant green.
10. Unplug the battery from the charger and the charge status LED will flash green which indicates the charger is ready to charge another battery.

SPECIFICATION:

AC Input: 100-240V
Battery Type: LiPo/LiFe
Cell Count: 2-4 cells
Charge Current: 1A/2A/3A ± 10%
Circuit Power: 20W
Current Drain for Balancing: 200mA

Package Includes:
1 x e4 Charger
1 x AC Power Cord
18AWG Wire Charging Cable
User Manual in English