CRIUS V/I Sensor Voltage & Current Sensor 50V / 90A compatible with Attopilot/APM - Blue + Golden

Brand: CRIUS; Quantity: 1 Piece(s)/pack; Color: Blue + golden; Material: PCN; Compatible device: RC helicopter; Functions: Test current and voltage; Other Feature: This is a small DC voltage and current sense board; It measuring voltage and current, then converted to a final analog voltage output by the INA-169; Voltage sense is accomplished by scaling to 3.3V ADC range by a precision resistor divider; The PCB is supplied without leads or connectors; The pad sizes are large enough to accommodate 12 gauge heavy duty leads (see datasheet) but care must be exercised in soldering; Smaller gauge leads are considerably easier to solder without creating shorts; This board can be used for many flight controller, like AIOP / APM; Document: http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Sensors/Current/DC%20Voltage%20and%20Current%20Sense%20PCB%20with%20Analog%20Output.pdf; How to Setup with AIOP / APM: http://code.google.com/p/ardupilot-mega/wiki/Voltage; Select AttoPilot 50V 90A in APM setup panel in Mission Planner. Hardware Features: 51.8V Max; 89.4A Max; Very low zero current offset; Analog output scaled for 3.3V ADC; Self Powered; Other; Dimension: 16 x 17mm; Weight: 1.4g; Packing List: 1 x V/I sensor1 x Connect cable (162mm)4 x 12AWG leads (50mm)1 x XT60 male connector 1 x XT60 female connector1 x Deans male connector1 x Deans female connector4 x Heat shrink tubing;