CIOKS DC5 Link 9V / 12V / 18V DC Universal Power Supply with 5 Isolated Outputs and 10 Flex Cables for Effect Pedals - Compatible with Temple Audio and Pedaltrain Nano / Mini / Metro Pedalboards

CIOKS DC5 Link 9V / 12V / 18V DC Universal Power Supply

The CIOKS DC5 Link is a small, lightweight power supply equipped 5 isolated outlets and provides a total of 900mA output current. This power supply can run Strymon and Eventide pedals on the switchable 9V / 12V outlets. The middle output jack of DC5 Link can be set from 9V to 18V, ideal for power-hungry dirt pedals such as Pigtronix and MXR.

CIOKS designed the DC5 with a super flat form factor so it would fit with Temple Audio Boards or Pedaltrain Nano, Mini, The New Nano+, Metro Pedalboards. The DC5 Link includes 10 Flex Cable, one of which is a Split Flex. The Split Flex Cable enables you to connect two pedals into one outlet only.

Equipped with high-efficiency toroidal transformer, the DC5 makes sure unwanted EMI noise will not bleed into your tone. All outlets are isolated to prevent any direct electrical connection. The short circuit protection makes sure the power supply operates smoothly even if one outlet overloads.

TECHNICAL SPECS:

• Pedals Compatible With: Strymon, Eventide, Pigtronix, MXR, and more
• AC Input: 110~120V AC 60Hz or 220~240V AC 50Hz, Max 23W
• Outputs 1~2: 9 or 12V DC / 100mA
• Outputs 3: 9 or 18V DC / 100mA
• Outlet 4~5: 9 or 12V DC / 300mA
• Dimensions: 5.1 x 3.5 x 1.2" (Excluding Rubber Feet)
• Weight: 1.5 lb

• CIOKS DC5 Link Power Supply
• Mains power cord
• 10 Flex Cables: 5x Type 1 - black with 5.5/2.1mm center negative DC plug | Type 2 - red with 5.5/2.1mm center positive DC plug | Type 4 - green with 5.5/2.5mm center positive DC plug | Type 5 - black with 3.5mm tip positive Jack plug | Type 6 - black with 9V battery clip | Split Flex Type 1 - black (powers two pedals of a single outlet)
• Pedalboard Mounting Hardware: 2 screws, hex key
• User Manual
• Drill Template (Product Sheet)
• Flex Guide