CIOKS AC Rider Link 9V or 12V DC Universal Power Supply with 9 Isolated Outputs and 9 Flex Cables for DigiTech Whammy, JamMan, Line6 M9 Effects Pedals

CIOKS AC Rider Link 9V or 12V Universal Power Supply

If you have various AC and DC pedals, the CIOKS AC Rider is a sweet addition to your pedalboard! If your pedalboard holds several pedals and you use a non-isolated power supply, noise problem will inevitably rise. So CIOKS designed the innovative AC Rider. Configured into three isolated sections, both Outputs 1~2 and 3~4 deliver 9V or 12V DC / 200mA. You can run low current 9V pedals into these sections. You can even 3-way daisy chain them using a Split Flex Cable (not included).

Meanwhile, Outlet 5~6 provides 9V or 12V DC / 800mA. You can power an Electro-Harmonix vacuum tube pedal or any type of DigiTech JamMan. If you have medium current pedals such as BOSS CE-20 or DD-20, you can power them in any section.

Each section has LED monitoring indicators that conveniently informs you when you're operating just on the edge of the current limit or overloads.

TECHNICAL SPECS:

• Compatible With: Electro-Harmonix Vacuum Tube Pedal, Kingsley AC Pedal, DigiTech Whammy, JamMan, Talker, Boomerang, Line 6 M9, and more
• AC Mains Input: 110~120V AC 60Hz or 220~240V AC 50Hz, Max 15W
• AC Mains Output: Same voltage as connected to AC input, Max current 2A~
• Outputs 1~2: 9 or 12V DC / 200mA | Outputs 3~4: 9 or 12V DC / 200mA | Outlet 5-6: 9 and 12V AC / 800mA
• Dimensions: 5.1 x 3.5 x 1.5" (Excluding Detachable Rubber Feet)
• Weight: 2.2 lb

• CIOKS AC Rider Universal Power Supply
• Mains power cord
• 9 Flex Cables: 5x Type 1 - black with 5.5/2.1mm center negative DC plug | Type 2 - red with 5.5/2.1mm center positive DC plug | Type 4 - green with 5.5/2.5mm center positive DC plug | Type 5 - black with 3.5mm tip positive Jack plug | Type 7 - blue with 2 pin DIN plug
• Pedalboard Mounting Hardware: screws, washers, stand-offs and a hex
• User Manual
• Drill Template
• Flex Guide