Buffalo Electronics IR Connecting Block (IR-100)

The IR-100 is the centerpiece of the infrared remote control system. A system wiring connection block where the power supply IR repeaters and IR flashers all tie together. The IR-100s advanced circuitry adjusts the incoming repeater signal levels and the outgoing flasher output levels for optimum remote control system performance.The IR-100s computer designed signal amplification circuitry allows long cable runs to work as well as short cable runs. A repeater 1000 away from the IR-100 will flash the controlled AV equipment exactly the same as a repeater 10 away will.The IR-100s flasher outputs are regulated to an optimum output level. Flashers will never flood the device under control causing missed commands and they will never reach out far enough to effect another device even if it uses the same IR codes.An advantage of regulated short range flasher output levels is that you can use multiples of the exact same component in multi-zone system designs in the same equipment rack and experience no IR remote control problems.Features. Exceptional 800 foot repeater run lengths with standard CAT56.. Noise reduction circuit improves IR data transmission.. Amplified input allows short and long repeater runs to work exactly the same.. Signal confirmation LED for troubleshooting.. 4 regulated flasher jacks for correct flasher output levels at any repeater distance.. Built-in optional system ground lug problem environments.. Parallel IR-100s to control more than 1 equipment stack or for more flashers.. Easy to create multiple listening zones using multiple IR-100s.. High quality brand name electronic components for long life.. Robust heavy duty build quality.. Designed with the professional installer in mind.