BriskHeat DHCX151300T4A DHCX Hazardous-Area Rated Drum Heater For T4A Rated Environments, Fits 55-Gallon Drums, W x L: 8 x 70-Inch, diameter 22.3-Inch, 120VAC

This 55-gallon (208L), 120V DHCX hazardous-area rated drum heater for T4A rated environments is made for metal drums. The high-limit thermostat is designed to keep the heater below NEC article 500 T-rating of 248°F (120°C), with an actual high-limit thermostat setting of 158°F (70°C). The patented grounded heating element is laminated between two layers of 23mm and two layers of 25mm fiberglass reinforced silicone rubber. It is moisture and chemical resistant, with a nominal silicone rubber density of 26oz/sq yd (881g/sq m) per layer. The heating element is uniformily placed to maximize heat distribution and meets NEC 427.23. The attached adjustable dual set-point temperature controller has a 6ft (1.8m) long power cord. One set-point is set at the high temperature limit and connected to a red indicator light. The leads from the blanket to the controller are enclosed in a liquid-tight conduit. The maximum exposure temperature on the heating surface is 400°F (204°C). Grounded. For Metal Drums. Material: Fiberglass Reinforced Silicone Rubber. T-Rating: T4A. NEC Temperature: 248°F (120°C). Actual Thermostat Temperature: 158°F (70°C). Maximum Exposure Temperature On Heating Surface: 400°F (204°C). Power Density: 2.5w/sq in (0.004w/sq mm). Nominal Silicone Rubber Density Per Layer: 26oz/sq yd (881g/sq m). Voltage: 120VAC. Watts: 1300. Diameter: 22.3in (565mm). Length: 70in (1778mm). Width: 8in (203m). Size: 55-Gallons (208L). BriskHeat #: DHCX151300T4A.