Brass Stacker Mosin Nagant M9130 M38 T53 Universal Fit Scout Scope Mount

This Scout Scope Mount works as an "universal fit" for Mosin Nagant variants Russian/Soviet M9130, M9159, M38, M39 and M44; Chinese M53 or T53; Polish M44; etc EXCEPT THE FINNISH MOSIN NAGANT Some M9130's either do not have the typical two pins holding the rear sight block to the barrel or those pins are soldered in place. In addition, these same pin holes may not both be the same distance from bore centerline resulting in an unacceptable degree of "pitch" when the mount is installed. Lastly, the rear sight block of the M9130 may not run parallel with the bore axis creating excessive mount "yaw". If your rifle has the above issues, the Universal Fit Anchor Point mount will work for you. This mount features the proven Anchor Point concept of attachment by utilizing the recoil lug and rear sight ladder pivot hole. See product review here: Guns and Tactics Magazine "ANCHOR POINT" Series - See Through Design FEATURES: Product provides for mounting of scout scope or other long eye relief (LER) optics to Mosin Nagant rifles without the need to drill and tap the receiver or make any permanent modifications to firearm. It is designed to use the recoil lug attachment point and rear sight ladder pivot attachment point allowing for the continued use of the original fixed/iron sights. TOOLS PROVIDED: Wrench: 1) 3/32” Hex wrench – steel; 1) 1/8” Hex wrench – steel; 1) 1/2” Hex body spanner wrench -steel, black oxide finish; Complete installation instructions are supplied. SCOPE & RINGS ARE NOT PROVIDED! TOOLS REQUIRED: Safety glasses, solid work surface or vise, hammer, punch, optional spanner wrench.